Drop Wire

Description
Rated Temperature 70 degree
Standard:
Conductor: Solid Bare Copper or Copper Coated Steel CCS
Insulation: PVC OR LLDPE

Application:
Used as wiring between the cable terminal or DP and the station protector.

Test Results Of Telephone Drop Wire
Parameters Minimum Requirement Test Equipment used
1.Conductor
Diameter (mm) 1.02 + 0.03 / -0.06 Micrometer
% elongation 1.5 (min) Shimadzu
Barding strength 760 (min) Shimadzu
2.Insulation
Thickness (mm) 1.0 min Projector profile
% elongation 100 min Shimadzu
Tenkle strength (MPa) 11 min Shimadzu
Insulation resistance 92 min Megger
Over diameter (mm) 5.8 major / 3.5 minor Projector profile
3.Electical test
Resistance @ 20 degree 80.4max Portable double
Bridge tester
% conductivity 30min Conductance tester
De-el-citric strength 7.5@min megger

Drop Wire